Condamine

Panel Specifications

* 2400mm wide
* 1800mm from bottom of bottom rail to top of top rail.
* 1470mm from bottom of bottom rail to top of mid-rail
* 2400mm high post (127mm x 127mm) with New England cap (additional post required at end of fence run)
* Bottom rail 152.4 x 50.8mm with aluminium insert for strength
* Mid rail 152.4 x 50.8mm
* Top rail 88.5mm x 50.8mm
* Tongue & groove seamless panel inserts (8) 1266mmH x 287mmW
22 pickets 22.2mm x 76.2mm

* drawings are indicative of styles only.

Cllick her for info on gates in this style

Daintree

Panel Specifications

* 2400mm wide
* 1800mm high from bottom of bottom rail to top of top rail.
* 1470mm from bottom of bottom rail to top of mid-rail
* 2400mm high post (127mm x 127mm) with New England cap (additional post required at end of fence run)
* Bottom rail 152.4 x 50.8mm with aluminium insert for strength
* Mid rail 152.4 x 50.8mm
* Top rail 88.5mm x 50.8mm
* Tongue & groove seamless panel inserts (8) 1266mmH x 287mmW
22 pickets 37.5mm x 37.5mm

* drawings are indicative of styles only.

Click here for info on gates in this style

Brisbane

Panel Specifications

* 2400mm wide
* 1800mm high from bottom of bottom rail to top of pickets.
* 1470mm from bottom of bottom rail to top of mid-rail
* 2400mm high post (127mm x 127mm) with New England cap (additional post required at end of fence run)
* Bottom rail 152.4 x 50.8mm with aluminium insert for strength
* Mid rail 152.4 x 50.8mm
* Top rail 88.5mm x 50.8mm
* Tongue & groove seamless panel inserts (8) 1266mmH x 287mmW
22 pickets 22.2mm x 76.2mm – shark tooth or flat-top caps

* drawings are indicative of styles only.

Click here for info on gates in this style

Coolum

Panel Specifications

* 2400mm wide
* 1500mm high from bottom of bottom rail to top of tallest picket
* 1000mm from bottom of bottom rail to top of mid-rail
* 2100mm high post (127mm x 127mm) with New England cap (additional post required at end of fence run)
* Bottom rail 152.4 x 50.8mm with aluminium insert for strength
* Mid rail 152.4 x 50.8mm
* Top rail 88.5mm x 50.8mm
* Tongue & groove seamless panel inserts (8) 900mmH x 287mmW
17 pickets 22.2mm x 76.2mm – shark tooth or flat-top caps

* drawings are indicative of styles only.

Click here for info on gates in this style